You must install two tilt Eurosens Degree sensors, one of which is mounted on the chassis to determine its inclination, and the second determines the position of the mechanism. Further, in the monitoring software, it is necessary to determine the difference in sensor readings.
No, the Eurosens Degree tilt sensor does not require calibration. It is enough to fix it on the mechanism and connect it to the GPS tracker.
The sensor sends data via several interfaces:
• Digital RS-485 interface: 3 angles of inclination in the LLS protocol (fuel level sensor protocol), 3 angles correspond to 3 sensor addresses;
• Analog output (0-10V) – angle inclination of one of the selected axes;
• Discrete output (short to ground) – when the tilt angle is exceeded […]
Application examples.
• measurement of the position of mechanisms: the angle of elevation of the loader arm, garbage truck, excavator, the angle of elevation of the body of the dump truck, operation mode of the harvester;
• control of trap openings of a gasoline tank truck;
• car roll-over sensor.
The Eurosens Degree sensor measures the orientation of its X, Y, Z axes in space relative to the gravity vector. A similar principle is used in tablets and smartphones to rotate the screen.
Imagine that the sensor is fixed on the X-Y plane, which is parallel to the horizon. In this case, we will be […]
