With some new sensor modification being completed now it is time to reshuffle eurosens Dominator model range. The name of the sensor has the following designation structure: eurosens Dominator X Y, where X, Y take the values according to the table:
Х |
Y |
||
Output interface |
Interface description |
version index |
Description |
RS 485 |
RS485 |
Ex |
explosion-proof
|
AF |
analog output, power supply 0.5-15 V (customizable, limited by power supply) |
||
frequency output, 200-2000 Hz (customizable) |
|||
K-line single-wire interface |
|||
RS |
RS-485, RS-232 |
Ext |
special version (custom length)
|
frequency output, 200-2000 Hz (customizable) |
|||
K-line single-wire interface |
|||
CAN |
CAN 2.0 interface |
||
frequency output, 200-2000 Hz (customizable) |
|||
K-line single-wire interface |
|||
AFRS |
RS232, RS485 |
||
analog output, power supply 0.5-15 V (customizable, limited by power supply) |
Mini – version with lower height of sensor enclosure. We don’t use the “Mini” index with RS 485 and Bt modifications because they exist only in Mini version.
|
||
frequency output, 200-2000 Hz (customizable) |
|||
K-line single-wire interface |
|||
Bt |
built-in battery and wireless interface Bluetooth Low Energy |
The eurosens fuel level sensors are available in one of two enclosures:
Some comments to the table:
- The most affordable model is the eurosens Dominator RS 485. This sensor is configured via the RS485 interface, so you can use any RS 485 adapter for configuration.
- A common configuration software is used for all sensors, which has many new useful tools to simplify calibration of the sensor and fuel tanks. You can find out more about it here.
- Explosion protection is marked by the Ex index.
- In the Dominator AF model, only one of the interfaces – analog, frequency or digital K-line – can operate at the same time.
- In the Dominator RS model, one of the digital interfaces (RS232/RS485) and the frequency/discrete/K-line interface work simultaneously.
- In the Dominator CAN model, the CAN interface and the single-wire K-line interface work simultaneously.
- All sensors have a modular design, the electrodes can be ordered together with the sensor or separately. The standard length of the electrodes is 700, 1000, 1500 mm. They can be lengthened by intermediate electrodes.
- The probes can be made in the version for water measurement as well as in non-standard lengths. Non-standard versions have an index “Ext”.
Examples:
- eurosens Dominator RS485 – fuel level sensor with RS485 interface, small enclosure.
- eurosens Dominator RS Mini – sensor with interfaces RS232/RS485, small enclosure.
- eurosens Dominator RS Ex – sensor with interfaces RS232/RS485, bigger enclosure, Ex-marking.
- eurosens Dominator Bt – wireless fuel level sensor with BLE-interface.
- eurosens Dominator RS Ex Ext – sensor with interfaces RS232/RS485, bigger enclosure, Ex-marking, with custom electrode length.
We are in social media
Facebook
LinkedIn
Youtube