Eurosens Delta 

Differential fuel flowmeter Eurosens Delta is used to measure the fuel consumption of diesel engine. Most engines have supply and return line. To obtain fuel consumption of engine it is necessary to measure both fuel flows and  calculate the difference. This task looks not easy but with Eurosens Delta you can receive accurate results immediately after the installation without any calibration.

Easy installation:

    • High-precision measurement
    • High corrosion resistance
    • Strong electronic circuit protection
    • Sealed automobile connector on sensor body
    • Indication lights provide easy understanding of device state

    In what cases a differential fuel flowmeter is the best choice for fuel consumption monitoring  – you can read there. Of course, Delta flow meters can be used in other applications too. In comparison with fuel level sensors, fuel flowmeters are much better in credibility of the results, that are independent of fuel composition, tank form and operating conditions. It is very a important issue – fuel monitoring system must be accurate and thrustworthy otherwise it is useless. Delta flow meters have a wide list of modifications, you can see them at SPECIFICATION tab. Eurosens Delta advantages for installers

  • Special free diagnostic software
  • Software function of flow direction reverse
  • Smart software processing of fuel flow pulses allows to avoid use of check valves. It mimimize hydraulic resistance of system and very important factor.
  • High quality of measuring chambers
  • Warranty term – 3 years, without limitation of passed flow.
  • You can use specially designed Deaerator device to remove air from fuel system.

Note: Differential method of measurement does high demands to flow meter precision. It is because flow rates in supply and return line usually are much bigger than engine fuel consumption. For example, for John Deere tractor , at idling in fuel supply line – 200 liters/hour, in return line – 197 liters/hour. Engine consumption – 3 liters/hour. That means that for adequate result at idling we need to measure both fuel flows with precision no more than 0.3%. Moreover, temperature expansion of fuel (0.7% per every 10 Celsius degrees) add extra error to differential measurement, because temperature of fuel coming to engine and returning to tank is differ. That means, you can’t use idea of 2 separate flometers without good precision and temperature correction. Fuel flow meters Delta are made from hard aluminium alloy, measuring chambers have antifriction coating, in both measuring chambers fuel temperature sensor is installed. Each manufactured flowmeter is pre-calibrated for differential application. Thereby Delta flowmeters can provide accurate results in any mode of engine operation. Unlike some other manufacturers, Delta flowmeter warranty is not limited by passed flow. 3 year without flow limitations.

Connecting thread M14x1, 5
Max pressure 2.5 MPa
Power voltage, V 10 – 50
Reverse polarity protection Yes
Temperature range,°C -40 – +85
Maximum flow rate in l/h * 500
Output interface pulses, RS232, RS485, K-Line, CAN
Seal rating IP 67
        • * In each of the measuring chamber

  Digit index means maximum fuel rate in each measuring chamber. It is a main parameter to choose suitable flow meter. Note: engine fuel consumption – it is only part of fuel rate in supply and return fuel flow.

Flow meter model Q start, liters/hour Q min, liters/hour Q nom, liters/hour Q max, liters/hour   Pulses per liter Error*
Delta PN 100 0,5 1 50 100 200 ± 1.2%
Delta PN 250 0,5 2 125 250 100 ± 1.2%
Delta PN 500 1,0 5 250 500 50 ± 1.5%
Delta PN 100 I 0,5 1 50 100 200 ± 1.2%
Delta PN 250 I 0,5 2 125 250 100 ± 1.2%
Delta PN 500 I 1,0 5 250 500 50 ± 1.5%
Delta PN A 100 I 0,5 1 50 100 200 ± 1.2%
Delta PN A 250 I 0,5 2 125 250 100 ± 1.2%
Delta PN A 500 I 1,0 5 250 500 50 ± 1.5%
Delta RS 100 0,5 1 50 100 200 ± 1.2%
Delta RS 250 0,5 2 125 250 100 ± 1.2%
Delta RS 500 1,0 5 250 500 50 ± 1.5%
Delta RS 100 I 0,5 1 50 100 200 ± 1.2%
Delta RS 250 I 0,5 2 125 250 100 ± 1.2%
Delta RS 500 I 1,0 5 250 500 50 ± 1.5%
Delta CAN 100 0,5 1 50 100 200 ± 1.2%
Delta CAN 250 0,5 2 125 250 100 ± 1.2%
Delta CAN 500 1,0 5 250 500 50 ± 1.5%
Delta CAN 100 I 0,5 1 50 100 200 ± 1.2%
Delta CAN 250 I 0,5 2 125 250 100 ± 1.2%
Delta CAN 500 I 1,0 5 250 500 50 ± 1.5%

Q start  – flow rate when fuel meter starts to measure Q min , Q max – Min and Max flow rate for range with declared precision РN – Pulse output RS – Serial interfaces RS-232/RS-485 CAN – CAN bus  interface SAE J1939 I – build-in LED display, 9-digit А – built-in long-life battery * Error calculated for fuel supply/consumption values   (Liters/hour)  : serie 100 – 45/10 ; serie 250 – 90/20; serie 500 – 160/30

Flyers

Eurosens Delta flyer
Eurosens Delta internal counters list
Eurosens Delta CAN flyer

Certificates

Certificate of Customs Union Technical Regulations 018/2011
EMC declaration – Customs Union Technical Regulations 020/2011
Eurosens certificate (E-mark)  
River register certificate

For installation

Direct, Delta installation manual
Eurosens Delta configurator
Eurosens Delta configurator manual
Eurosens Delta firmware v.3.5
Delta PN passport
Delta RS passport
Delta CAN passport
Delta PN I passport
Delta PN A I passport
Eurosens Delta RS protocol
Eurosens Delta MODBUS protocol
Eurosens Delta CAN messages

For developers : Eurosens Delta 3D CAD drawings

Eurosens Delta IGS file
Eurosens Delta STEP file

Subscribe to our Youtube channel

Portfolio